Creature Cocks Predator Stroker — Gray TPE Masturbator

Product Overview

This gray Creature Cocks Predator stroker is a handheld TPE sleeve housed in an ABS case with a silicone base plug. The interior features rows of ribs, grooves and nubs for textured stimulation, and the open-ended sleeve can be removed for cleaning. The case measures 8.7 inches long by 3.5 inches wide, with an insertion depth of 7.25 inches.

Product Highlights

• Textured interior with ribs, grooves and nubs for varied sensation.
• Silicone plug at the base lets you add or release suction and pressure.
• Open-ended, removable TPE sleeve for easier rinsing and drying.
• Durable ABS plastic case with indented dimples on the exterior.
• Measured insertion depth: 7.25 inches; case length: 8.7 inches.

Use Guidance

Use this stroker as a handheld sleeve for shaft stimulation. For best results use only water-based lubricants, as specified by the manufacturer. Control suction and tightness by leaving the silicone plug in place to build pressure with each pump or remove the plug to release suction. Check the insertion depth to ensure the fit matches your needs and proceed at a comfortable pace.

Cleaning and Care

Remove the sleeve from the case for a thorough wash. Rinse the open-ended sleeve and the case under running water, wash the sleeve separately, then allow both parts to air dry completely before reassembly. Replace the cap when the sleeve is reinserted to keep dust and debris out. Inspect the sleeve for damage before each use and follow any additional manufacturer instructions on the product packaging.

Frequently Asked Questions

What materials are used in this stroker?

The sleeve is made from TPE. The outer case is ABS plastic and the base plug is silicone.

How do I adjust the suction or pressure?

Keep the silicone plug seated in the base to build pressure and suction with each pump. Removing the plug will release the pressure; the case is open-ended once the plug is out.

How should I clean and store the stroker?

Remove the sleeve and rinse it separately, rinse the case, then let both air dry fully before reassembling. Replace the cap to protect the sleeve during storage. Refer to the product packaging for any additional manufacturer care instructions.

Explore more in our Male Toys collection.