Creature Cocks Wormhole Stroker — Purple TPE Masturbator

Product Overview

A soft, stretch TPE stroker featuring a taloned circular entry and an internal canal lined with ribs, grooves and nubs for pronounced texture. The sleeve sits inside an ABS plastic case with a silicone plug at the base to increase pressure and suction when left in place; remove the plug to release pressure. The case becomes open-ended with the plug removed for easy rinsing. Measurements: case 8.7 inches length x 3.5 inches width; insertion depth 7.25 inches. Use only with water-based lubricants as indicated by the manufacturer.

Product Highlights

• Soft, stretchy TPE sleeve with pronounced internal texture.
• Taloned circular entrance for a distinctive entry sensation.
• Silicone plug at the base lets you vary pressure and suction.
• Open-ended case and removable sleeve for more thorough rinsing.
• Case constructed from ABS plastic with silicone components.

Use Guidance

Apply a generous amount of water-based lubricant to the entry and sleeve before use. Control suction and pressure by keeping the silicone plug inserted for increased suction or removing it to reduce pressure and allow fluid to pass through the case. Reinsert the sleeve fully before placing the cap to protect from dust between sessions. Follow any additional manufacturer instructions provided with the product.

Cleaning and Care

Remove the silicone plug and rinse the open-ended case to flush lubricants away. For a deeper clean, remove the sleeve from the case and wash the sleeve separately, then let it air dry completely before reassembly. Replace the cap once the sleeve is reinserted to keep the interior dust-free. Store in a cool, dry place away from direct sunlight and check the product packaging for full care recommendations.

Frequently Asked Questions

What lubricant should I use with this stroker?

The manufacturer specifies using only water-based lubricants. Check the product packaging for any additional lubricant guidance.

How do I adjust the suction and pressure?

The silicone plug at the base of the case controls pressure and suction: leave it in place to build pressure and suction, or remove it to release pressure and allow the case to drain.

How should I clean the sleeve and case?

Remove the plug and rinse the open-ended case. For a more thorough cleanup, remove the sleeve from the case and wash it separately, then air dry both parts completely before reassembling and replacing the cap. Refer to the manufacturer instructions on the packaging for full care details.

Explore more in our Male Toys collection.