Tenga 3D Pile Male Masturbator — Reusable Textured Sleeve

Product Overview

The Tenga 3D Pile is a reusable male masturbator featuring a layered, three-dimensional triangular texture that changes sensation from a dense, fine pulp feeling to a more pronounced bulging stimulus toward the tip. It includes a removable tray and stand and ships with a sample lubricant.

Product Highlights

• Layered triangular 3D texture for varied internal sensation
• Stretchable internal sleeve — insertion length stretches to approx. 240 mm and width to approx. 70 mm
• Removable ABS tray and stand for storage and drying
• Internal sleeve material listed as Ag Antibacterial Elastomer
• Reusable, easy to clean; sample lubricant included

How to Use

Remove the clear top case and lift the 3D sleeve from its stand. Invert the sleeve so the external details become the internal stimulation surface. Apply lubricant to the inside of the sleeve and the insertion point (the included sample lubricant is recommended by the manufacturer). Insert and enjoy. After use, follow the cleaning steps below before storing.

Storage and Care

Rinse the sleeve thoroughly under warm running water and invert it to clean the interior. A mild, neutral soap may be used if desired. Place the sleeve back on the stand with the textured side outward to air dry fully. Only replace the clear cover once the sleeve is completely dry. Store in a cool, dry place. Refer to the product packaging for any additional manufacturer instructions.

Frequently Asked Questions

What lubricant should I use with this product?

The manufacturer recommends using Tenga Hole Lotion and a sample is included. Use a lubricant suitable for the sleeve material and follow any guidance on the product packaging or manufacturer instructions.

How do I clean the sleeve after use?

Rinse thoroughly with warm running water and invert the sleeve to reach the interior. You may use a mild neutral soap. Allow the sleeve to air dry on the stand with the textured side outward, and replace the clear cover only when fully dry.

What are the product dimensions and fit?

The external case measures 48 × 48 × 116 mm. The internal sleeve stretches to an insertion length of approximately 240 mm and an insertion width of approximately 70 mm. The unit weight is about 279 g. Check the measurements to determine fit for your needs.

Shop HimAndHerToys

Order from HimAndHerToys with discreet packaging and secure online checkout. Review the product packaging and manufacturer instructions before use.